Preface Official Specs Versions Price Short Review Long Review What's Included Manual and Packaging Build Quality and Durability Size Retention Power User Interface and Operation Modes LED and beam Tint vs... Beamshots, Runtime, etc table. Comparisons Conclusion What I like What I don't like Up Next Notes
I, like everyone else, recently reviewed the Ultratac A1. When I agreed to that one, I also asked for this light, the Ultratac K18 Mini Brass. Mike at Ultratac agreed, and here’s my review of this tiny little light!
There are three bodies of this light. Brass (seen here), black anodized aluminum, and stainless steel.
There’s also a 2017 verision, which is an AAA light.
The brass is currently $18.99, and the other two body metals are a dollar more at $19.99. The 2017 model is strangely $49.99, for no good reason.
A clicky on a 10180 light? Yes please! In brass! Even more yes please! I really enjoy the simplicity of this light, and of course I like brass. It’s a very nice combo. I do think brass should always be paired with Nichia, though. 🙂
- Ultratac K18 Mini Brass Keychain Flashlight
- 10180 Li-ion cell (not pictured)
- Charge cap for included cell
- Charge cable (USB to Micro-USB)
- Spare o-rings (2)
Package and Manual
There’s a sleeve around a slip-fit box. The sleeve has instructions printed, and runtimes and the like.
There’s no foam, but the light doesn’t slip around because it’s vacuum sealed.
The vacuum sealed package is intended to protect the brass from tarnishing. I’m not sure how important that is, because the brass seems to be coated anyway. There are some finger print marks after use, but it doesn’t have the typical brass smell.
This piece of paper that looks like a manual is in fact not a manual. The sleeve of the box covers most of the manual type information, except the actual UI.
Build Quality and Disassembly
The build quality of this tiny light is as good as most lights of this size. Which is to say, acceptable. Neither bad at all, or greatly fantastic.
There are very light fins in the head, but as cool as this light stays, those are fairly irrelevant.
Below are the contacts of the charging head. The light head, which I seem to have no photos of, is very similar but with a black mcpcb, and a brass retaining ring.
There’s even a tritium slot in the tail! It’s a standard tritium slot for flashlights – should fit the ‘standard’ 1.5x6mm tritium vial.
Officially 41 mm long x 13mm head diameter, and weighing in at 17 gram without battery.
This light is small, but there are certainly smaller 10180 lights. I’ll ‘allow’ it because this light is unusually clicky!
The only thing this light includes for carry is the (already installed) split ring on the tail cap. That’s removable. The split ring does not prevent tailstanding!
The K18 Mini is powered by a single unprotected 10180 lithium ion cell. This cell is included.
Here’s a runtime on High. Thirty second output looks to be around 125 lumens, which is in line with the manufacturer claim of 130 lumens. There’s no complex circuitry here – output tracks voltage all the way down. There’s also no low voltage protection.
The K18 Mini (and for that matter, the 2017 edition too) includes a charge port which is screwed on to the body, after the light head has been removed. Once installed, the included cell may be charged.
It all worked great, and just like it should, but as is the case with all these tiny screw-on chargers, the build quality isn’t fantastic. See how the port kind of swims in the opening on the charge head.
The charge profile looks great, though. Stable charging at around 0.11A. Capacity is around 70mAh, which is typical of these 10180 cells.
User Interface and Operation
In an unusual twist for 10180 lights, this is actually a clicky light! There’s a side e-switch, labeled “MODE.” I think the cover is actually metal, and the screen print is just a little off centered on my sample.
The UI is extremely simple. Here’s a table!
|Off||Hold||On (Mode Memory)|
|Off||Double Click||Switches between lockout (one flash) and Normal operation (two flashes)|
|On||Click||Mode advance (L>H)|
|Mode||Mode Claimed Output (lm)||Claimed Runtime||Measured Lumens||Tailcap Amps|
LED and Beam
Ultratac has put a Cree XP-G2 in this tiny light. Surprisingly there’s an actual reflector, which is orange peel. The beam has a good bit of spot, but plenty of spill too, making for a pretty good keychain light profile.
Tint vs BLF-348
Beamshots, Runtime, and Lux Measurements
|Ultratac K18 Mini Brass|
|Glamour Shots||Beamshots [0.3″, f/8, ISO 100, 5000k]|
|Claimed Lumens (lm)||130|
|Lux (Measured)||57 lux @ 2.849 m|
|Candela (Calculated) in cd||462.7|
|Throw (Calculated) (m)||43.0|
|Throw (Claimed) (m)||–|
I don’t think you’ll find another clicky 10180 light. If you don’t care about that, then there are tons of options! I personally don’t like twisty lights, so this is a great entry for me.
What I like
- Brass adds a nice heft, and the look is great
- Simple but surprisingly feature rich UI
- Full package, including cell and charger
- Charge profile looks perfect
- Tritium slot
What I don’t like
- Overall the light could be shorter – a TIR would help with that.
- I think Brass lights should always have Nichia emitters
I have a carbon fiber knife and some other lights for later in the week! Stay tuned!
- This light was provided by Ultratac for review. I was not paid to write this review.
- This content originally appeared at zeroair.wordpress.com. Please visit there for the best experience!
- Whether or not I have a coupon for this light, I do have a bunch of coupons!! Have a look at my spreadsheet for those coupons. It’s possible to subscribe and get notifications when the sheet is edited!!