Preface Official Specs Versions Price Short Review Long Review What's Included Manual and Packaging Build Quality and Durability Size Retention Power User Interface and Operation Modes LED and beam Tint vs... Beamshots, Runtime, etc table. Comparisons Conclusion What I like What I don't like Up Next Notes
Here’s a review of another Thrunite. In truth, and as I just reviewed the TN42, this review will be much the same as that review, but with more consideration for the battery pack (which is the main/only difference). I liked the regular TN42, so let’s see how the TN42c v2 pans out!
Of this light there are two versions; CW and NW. Of the TN42 family in general there are more versions. There’s the TN42c, which also has internal battery and on-board charging. And the original TN42 is still available of course, too, if you prefer to bring your own cells to the mix.
This light retails for around $270. With the cell-less TN42 requiring both cells and a charger, that’s not that huge of an increase ($70) but it’s a fairly steep difference.
Edit: updated price! This light goes for $220 now on Thrunite’s official amazon page. Also on the Thrunite website, both lights can get 20% off by using the code: 20%.
I like it just like I liked the TN42. The battery pack is quite nice, and the charging proceeds at 3A, which is respectable. I do enjoy the ability to have and charge my own cells, so my leanings are probably toward the TN42.
- Thrunite TN42c V2 Flashlight
- Shoulder strap
- Spare o-rings (2)
- Split ring
- Replacement switch cover
- Spare charge port cover
- Wall wart (8.4V 3.5A output)
- Manual and paperwork
Package and Manual
Thrunite has standard packaging, and even their big lights ship in it. It’s a simple flap-cover card board box with Thrunite labeling, and a CW/NW checkbox on the side.
Inside, the light is cradled in custom cut foam, and packaged inside a plastic baggie. It’s very secure packaging.
Here’s the included manual:
Build Quality and Disassembly
As most Thrunite lights, the build quality on the TN42c V2 is great. The anodizing is smooth and tough. The knurling is grippy diamond pattern, and in the right places. (Those places being the two places you need grip for unscrewing the body off the light.)
The head has cooling fins, and also the shoulder strap attachment point.
The knurling is extremely well done (perfectly uniform) and quite grippy. It’s also in very useful places (head and tail, for easy separation of the parts). That said, this light really won’t ever need to be disassembled, so….
The threads are very nice and well lubed.
Both the head and tail have similar connection points. Contact is made well.
Three screw hold the cover over the driver (and four for the battery compartment). They are easily removed.
Once those are removed, the battery slides right out.
Dimensions: 206mm (length) x 100mm x 52mm.
Weight: 850g (including battery).
Slightly larger than the Convoy S2+. Slightly.
It’s exactly the same size as the TN42, however. The addition of charging doesn’t add any length or girth or anything.
Here’s the TN42c V2 with the Imalent DX80.
The TN42 ships with a shoulder strap.
This strap has a clip ring to connect on the tailcap, and a squeeze … thing… which conects around the head (just over the switch). I don’t love that it’s just over the switch, but it makes sense because of how the light is carried with the strap. This basically puts the switch right at your thumb. Of course the same argument could be made if the strap connector was on the other side, since that’d put the switch right at your index finger. Either way, this isn’t too bad.
There’s nothing else for carrying this light. No pouch, for example. And no way to protect that big lens, either!
Power for this big light comes from 18650 cells. Four of them. But unlike the TN42, these cells are built in and not intended to be removed. They’re bundled with shrink wrap, and have a barrel plug charge port.
Here’s a runtime on Turbo, which is exactly like the runtime from the TN42. Output is essentially the same, too.
And here’s High. The light is ridiculously stable on High, until it shuts off. It is possible to turn the light on even after it’s shut down because of LVP, but it will likely not run long this way.
The internal battery is charged via this 8.4V wall power adapter, rated at 3.5A.
This connects to the light with a barrel plug, which is the standard 12V size (yes, 12V size).
The charge port on the light is covered by a rubber plug.
The charge port is actually built into the battery, not the light.
User Interface and Operation
There’s a single switch on the TN42c V2. It’s just below the head, and is a clicky e-switch with an indication function. It’s exactly like the TN42 switch (which I also loved).
I like this switch. The action is low, the pad is wide, it’s metal (or close enough), it’s easy to find…. Thrunite does e-switches right!
Here’s a UI table!
|Off||Click||On (Mode Memory except Turbo/Firefly/Strobe)|
|On||Hold||Mode cycle (LMH)*|
* There’s a mode cycle that’s hard to explain in table form. When the light is on, the only way to get to High is to cycle from low. If you turn the light on to Medium, and hold the switch to advance, the advance is to Low first, then Medium then High. In fact any time you’re in medium, and you release the switch, the next advance upon holding the switch, will be low, whereby you need to cycle through low and medium to get to high. I found this to be quite cumbersome.
|Mode||Mode Claimed Output (lm)||Claimed Runtime||Measured Lumens||Tailcap Amps|
LED and Beam
Thrunite uses a Cree XHP35 HI for this throwiest of thowers. The version I have is neutral white, and I think that’s the best choice. The reflector is very smooth, broad, and deep. There’s a centering ring around the emitter, too.
Some outdoor shots! All of these are with the same camera settings, chosen to be closest to what I see in person. 0.3″ f4 ISO 800 5000K.
First off, some references.
Lumintop BLF GT Mini. Imalent DX80. Imalent RT35.
Same settings with all modes of the Thrunite TN42c V2.
Lumintop BLF GT Mini (lowish, then high). Imalent DX80. Imalent RT35.
Same settings with all modes of the Thrunite TN42c V2.
Tint vs BLF-348
Beamshots, Runtime, and Lux Measurements
|Thrunite TN42C V2|
|Emitter||Cree XHP35 HI|
|Claimed Lumens (lm)||2000|
|Lux (Measured)||10900 lux @ 7.643 m|
|Candela (Calculated) in cd||636728.4|
|Throw (Calculated) (m)||1595.9|
|Throw (Claimed) (m)||1550|
Yes, there are a bunch of “throw king” Cree XHP35 HI lights available now. But the TN42 family still throws best. The TN42c V2 doesn’t outthrow the TN42, but at that range it’s a technicality. Yes, the BLF-GT throws farther, absolutely. It also has some UI advantage (if you like ramping, and programmability). I still like the TN42 series much more for usability and the built in battery of this light is no joke.
What I like
- Very good LVP
- Indicating switch
- Hits actual throw numbers (and much more!)
- Comparatively light (since just 4×18650)
- Built in battery works very well, and powers the light fine
- Charging of the BP10 actually hits the 3A specification
What I don’t like
- Knurling is a little bit grippy for my tastes
- Weird mode cycling up to High
- More expensive than the TN42, which is already expensive
More flashlights for next week! And I should wrap on a cell review (which I find fun, in case it’s not evident in those posts). I have chargers in for review, as well! Lots of things on the menu! Lots of work to do!
- This light was provided by Thrunite for review. I was not paid to write this review.
- This content originally appeared at zeroair.wordpress.com. Please visit there for the best experience!
- Whether or not I have a coupon for this light, I do have a bunch of coupons!! Have a look at my spreadsheet for those coupons. It’s possible to subscribe and get notifications when the sheet is edited!!